ZAR mini Lux 12

Our beautiful ZAR miniâ„¢ LUX line has different sizes and versions to offer. All boats are equipped with a bow locker, engine well and a flat double flooring. The design of the hull and cockpit is selfdraining. All boats offer as standard equipment a Teak design EVA floor, bow cushion, bow backrest, bow step plate, keelguard, bimini holder, backrest, luxury steering console and a reinforced hull.

As optional equipment you can choose from a variety of sunroofs, bilge pumps, bathing steps and many more things. 

The ZAR miniâ„¢ LUX line can easily pull water toys, waterski (from30hp) and tubes with the two installed D-rings on the transom, but you can also install a towing mast behind the backrest, so you can also do wakeboarding.

Every ZAR miniâ„¢ has four Davit lifting points. Two in the bow and two on the transom.

Due to the very light aluminum hull it can go very fast and plane easily with a smaller engine. The hull will not face any problems of Osmosis or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR miniâ„¢ RIB.

All RIB inflatables from ZAR miniâ„¢ until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.050g/m2 and a thickness of 0.9mm.

All RIB inflatables from ZAR miniâ„¢ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.

All ZAR mini RIB inflatables are also available in CSM (formally known as Hypalonâ„¢ from DuPontâ„¢) with a special design. Please ask your ZAR miniâ„¢ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatexâ„¢ that is one on the best material on the world market today. It has been manufactured since 60 years.

All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.

Every single ZAR miniâ„¢ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.

With our large standard equipment and our modern Italian Design, the ZAR miniâ„¢ inflatables are one of a kind.

For all kind of watersport you can find your matching ZAR miniâ„¢ RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR miniâ„¢ LUX is able to satisfy your expectations.

Read More

Pickup Availability:

Malta
(Out of Stock)
  • Hypalon
  • PVC
0.00

Specifications

Length 350cm
In­ter­nal Length 256cm
Width 190cm
In­ter­nal Width 92cm
Tube Di­am­e­ter  49cm
Boat Weight  138kg
Boat Ca­pac­ity  600kg
Per­sons Ca­pac­ity 5 per­son
In­fla­tion Points  4 pieces
Rec­om­mended En­gine Power  30HP  
Max En­gine Power 40HP  
En­gine Weight  35kg
Boat Ma­te­r­ial PVC/Hypalon
En­gine Shaft Short
Hull Type Aluminium Rib Hull