ZAR mini Rib 15DL

Our ZAR mini™ RIB line has different sizes and versions. The Rib 15 DL is equipped with a bow locker (“L”) and a flat double flooring (“D”). All boats starting from RIB11 have a bow locker and from RIB 12 a double flooring and a bow locker as standard features. Below these sizes (RIB8,9 & 10) you can choose what you need.

As optional equipment there are steering consoles and double seating (starting from RIB9 and only with double floor). You can also choose from a variety of sunroofs, bilge pumps, cushions and many more things.

Due to the very light aluminum hull it can go very fast and plane easily with a smaller engine. The hull will not face any problems of Osmoses or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR mini™ RIB.

Read More

Pickup Availability:

Malta
(Out of Stock)
  • Hypalon
  • PVC
0.00

Features

Deep-V bottom
Reinforced integral transom for outboard engine
Splash guard on transom
Self drainage plug
Multi-chamber buoyancy tube
Tough raised rubbing strake with splash guard
Adjustable & removable ALU seat(s) O
Anchor bow nose with cleat
2 Bow lifting handle
2 Rear lifting handles
Holding handles on tube
Safety valve
Anti slip pattern inside
Bi color tube with deco
Keel guard
2 oarlocks with 2 oars and oar posts
High efficiency foot pump
Extra wide double flooring flat inside
Bow locker with anchor locker and fuel tank place 24l
Foldable steering console O
Double seat with backrest O
CSM tube material from Hypatex (Hypalon) O
Underseat bag with soft cushion for seat O
Welded PVC tube material
Extra Powdercoated aluminium hull – 200°C
 
• (available on this model) / – (not available on this model) / O (optional)

Specifications

 
Length 460cm
In­ter­nal Length 363cm
Width 210cm
In­ter­nal Width 105cm
Tube Di­am­e­ter  51cm
Boat Weight  171kg
Boat Ca­pac­ity  900kg
Per­sons Ca­pac­ity 9 per­son
In­fla­tion Points  6 pieces
Rec­om­mended En­gine Power  50HP  
Max En­gine Power 60HP  
En­gine Weight  120kg
Boat Ma­te­r­ial PVC/Hypalon
En­gine Shaft Long
Hull Type Aluminium Rib Hull

Additional Info

All RIB inflatables from ZAR mini™ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.

 

All ZAR miniTM RIB inflatables are also available in CSM (formally known as Hypalon™ from DuPont™) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatex™ that is one on the best material on the world market today. It has been manufactured since 60 years.

 

All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.

 

Every single ZAR mini™ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.

 

With our large standard equipment and our modern Italian Design, the ZAR mini™ inflatables are one of a kind. Starting from RIB13 you will have an extra wide bow.

 

For all kind of watersport you can find your matching ZAR mini™ RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR mini™ RIB is able to satisfy your expectations.

 

The ZAR mini™ RIB line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom.

Every ZAR mini™ has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR mini™ has a bow locker, you will have four lifting points.